Established in September 2003, LELab Sdn Bhd has been establishing a strong relationship with our customers and principal manufactures in the scientific industry. Besides, we also built a large network of dealers throughout Malaysia and ASEAN. All our clientele are come from different field including research & development, water & waste water industry, power industry, oil & gas industry, quality testing & measurement, engineering, pharmaceuticals and life science research.
Today, we have been able to expand and diversify our business into more specific areas of supplying the Laboratory Analysis Instruments & Laboratory Equipment Supplier as an Authorized Distributor of many leading manufactures from all over the world.
Our products and services are divided into specialized divisions to meet each science industry demand. They are Laboratory & Environmental Products, Process & Engineering Products and Test & Measurement Products.
With our leading world known products and highly skilled trained staff, we will becomes a one-stop-solution provider in science community.
mPlatoon SystemmPlatoon SystemMobile Wireless Multi-Gas Team Warning SystemThe mPlatoon System is a quickly deployable set of mobile multi-gas meters that communicate wirelessly to a central command station (mLink-F) up to 3 km (2 miles) distant. The system is ideal for Hazmat response, temporary venue protection, large industrial site activities, etc. The mLink-F connects with up to 8 Squads of 8 monitors each, for a total of 64 personnel with gas meters. An mSquad consists of one Head monitor (MP400H) and 3 or 7 Soldier monitors (MP400S) operating within a 0.8-km (1/2-mile) radius. Each 4- or 5-gas monitor has options for a full range of sensors for toxic gases, oxygen (O2), combustibles (LEL) and carbon dioxide (CO2). In addition to high gas concentration alarms, the Squad Head and central mLink-F modem receive any Man-Down alarms to notify them of a worker in distress. The overall operation is overseen from an Android smartphone or tablet that communicates by wireless BLE to the mLink-F within 10 m (33 ft.). The mLink-F normally runs on 100-240 VAC power and is not intrinsically safe, while all the Squad monitors run on batteries and are Class I Div I certified to operate in hazardous zones. However, the entire mPlatoon can be mobilized by operating the mLink-F out of a vehicle or utilizing its back-up battery, which runs for up to 18 hours. For smaller operations, the mLink-F can be replaced by the lower-cost mLink-P. The MP400S and MP400H have rugged construction and easy-to-learn 2-button operation.Product Features
| VOXI Fixed VOC MonitorVOXI Fixed VOC MonitorProfessional gas detection and alarm systemsThe VOXI series of fixed transmitters utilize photo-ionization detection (PID) technology to monitor volatile organic compounds (VOCs) at resolutions of 1 ppb with the MP812 and 10 ppb with the MP815. A built-in heater prevents the condensation of moisture in the transmitter under high-humidity conditions. Innovative designs of the ultraviolet (UV) 10.6 eV lamp and electrometer reduce contamination, producing more accurate and stable readings and extending maintenance intervals. Mobile apps and a Bluetooth controller make on-site configuration, testing and trouble-shooting easy and handy. The OLED display is visible from a distance even under strong lighting, while data and alarms are continuously sent to a controller wirelessly or via cables. Outputs include analog 4-20 mA, digital RS485, 3 relays and a Strobe/Horn port. Major applications include VOC emission monitoring around petrochemical plants, manufacturing and processing facilities.Product Features
| NEO Series Photo-ionization DetectorsNEO Photo-ionization DetectorsProfessional gas detection and alarm systems
The NEO is one of the most advanced handheld VOC (Volatile Organic Compound) monitors available for ppb (parts per billion) detection. The NEO offers several models from the most sensitive 1 ppb to a high range up to 15,000 ppm for different applications and a benzene-specific version (NEO BENZ). A novel design of Photo-ionization Detector (PID) and Ultraviolet (UV) lamp reduces interferences due to humidity. Options include real-time data monitoring with a built-in wireless modem using mPower Suite application software.
Product Features
| POLI MP400 Multi-Gas DetectorsPOLI Multi-Gas DetectorsProfessional gas detection and alarm systems
The POLI multi-gas detectors (MP400/MP400P/MP400S/MP400H) offer 4- or 5-gas monitoring of oxygen (O2), combustibles (LEL), numerous toxic gas options, carbon dioxide (CO2), and volatile organic compounds (VOCs). The MP400 is a basic 4-gas model with diffusion sampling, often configured with O2, LEL, carbon monoxide (CO) and Hydrogen Sulfide (H2S) for confined space entry compliance. The MP400P has pumped sampling and offers a full range of of over 30 sensor options, including electrochemical (EC), pellistor, non-dispersive infrared (NDIR) and photo-ionization detector (PID). Use of combined CO/H2S or H2S/SO2 sensors in the MP400P allows up to five gases to be monitored. The MP400S and MP400H are used in wireless communication systems for real-time monitoring of gas readings and alarm status, including man-down alarm, from remote locations for better visibility and faster response. One MP400H head monitor communicates with up to 7 MP400S Soldiers. Contact us for larger wireless systems with up to 32 monitors
Product Features
The POLI Docking Station provides easy instrument bump testing, calibration, configuration, firmware upgrade, data download, and calibration certificates. Two versions are available, one for pumped POLIs and one for diffusion POLIs |
UNI 321 Maintenance-Free Single Gas DetectorsUNI 321 Maintenance-Free Single Gas DetectorsProfessional gas detection and alarm systems
The UNI 321 is a disposable, maintenance-free version of the UNI single gas monitor. It detects hydrogen sulfide (H2S), carbon monoxide (CO) or oxygen (O2) in your selection of models for an operating life of either 12 months (MP101), 24 months (MP102) or 36 months (MP103). The detectors have a large LCD providing maximum readability in the field. Six bright red LEDs allow for quick alarm notification. Constructed of strong and durable material, the UNI 321 is designed to be comfortable yet drop-resistant. The UNI 321 series can easily be bump tested and calibrated either manually or using the convenient Single Docking Box, or CaliCase for up to 4 units at a time.
Product Features
| UNI MP100 Single Gas DetectorsUNI MP100 Single Gas Detectors Professional gas detection and alarm systems The UNI MP100 offers a simple portable solution for the widest array of toxic gas and oxygen (O2) applications on the market. In addition to typical sensors such as carbon monoxide (CO), hydrogen sulfide (H2S), nitrogen (NOx), ammonia (NH3) and sulfur dioxide (SO2), we offer less-common sensors including hydrogen chloride, phosphine, ozone, ethylene oxide, methyl mercaptan, arsine and phosgene. The monitors have a large LCD providing maximum readability in the field and are made with six bright red LEDs allowing for a quick alarm notification. Constructed of strong and durable material, the UNI is designed to be comfortable yet drop-resistant. The UNI series can easily be bump tested and calibrated either manually or using the convenient Single Docking Box, or CaliCase for up to 4 units at a time. Product Features
UNI Docking Stations provide instrument bump testing, calibration, configuration and data download. The UNI Docking Box is designed for one instrument while the CaliCase handles up to 4 instruments at a time. | Boekel Scientific GEN2 CO2 Incubator, 155000, 4 Cuft (115V/230V)
The Boekel Scientific GEN2 CO2 Incubator shakes up your stationary, spinner flask and shaker cell culture routine. Easily define control programs for CO2 levels, temperature and humidity alarm levels, then download your team's data to a USB drive or through the ethernet connection.
» Advanced Control System for Custom Temperature & CO2 programs, Timers, and Alarms » Vivid Color Touch Screen That Can Easily Be Viewed from Across the Room » Double Door Design with Clear Tempered Glass Viewing Door » Internal Power Outlet with Time-Based Control Options Item » Extremely Precise Temperature and CO2 Control » USB and Ethernet Data Ports » Two-year Warranty » Made in the U.S.A | Boekel Scientific GEN2 Refrigerated Incubator, 165000, 4 Cuft (115V/230V)The unit has an easily viewable, bright color touchscreen that displays alarms, current temperature, and the humidity level. The user can easily control and define temperature programs, alarm setpoints and control the internal power outlet based on time. The user interface was carefully designed to be intuitive and easily readable. The display can show temperature and humidity graphs and this data can be downloaded to a USB drive or through an Ethernet connection. The incubator is ideal for standard microbial work or low temperature work such as BOD testing, Drosophila, and extremophile bacteria culture because of the high-efficiency thermoelectric cooling. The unit can also add humidity to the chamber with the included humidity pan. Contact your local laboratory equipment distributor or Boekel Scientific directly for more information about this exciting new piece of equipment.
» Advanced Configurable Control System for Standard and Custom Culture Conditions » Vivid Color Touch Screen That Can Easily Be Viewed from Across the Room » Thermoelectric Cooling to Support Low Temperature Incubation Processes » Internal Power Outlet With Time-Based Control Options » USB and Ethernet Data Ports » Two-year Warranty » Made in the U.S.A
Device Overview
Applications Information
Additional Applications
|
Boekel Scientific Small Platelet Incubator And Agitator, 301200/301550The small platelet agitator with incubator from Boekel Scientific offers real value. With a patent-pending inventory management system, built-in thermal printer and USB port to download event logs, this incubator/agitator reduces waste and saves time.
Applications
| Boekel Scientific Large Platelet Incubator And Agitator, 301300/301650Boekel Scientific introduces their large platelet agitator and platelet incubator with 8 removable shelves. The incubator features a patent pending inventory management system, a compressor-less / gas-less design, an onboard thermal graph printer, battery backup, a downloadable equipment data log, and an easy to use 7 inch industrial color touch screen. The agitation system has been designed for continuous quiet operation and to meet mixing requirements.
Applications
| Boekel Scientific GEN2 BOD Incubator, 165000, 4 Cuft, (115V/230V)The unit has an easily viewable, bright color touchscreen that displays alarms, current temperature, and the humidity level. The user can easily control and define temperature programs, alarm set points and control the internal power outlet based on time. The user interface was carefully designed to be intuitive and easily readable. The display can show temperature and humidity graphs and this data can be downloaded to a USB drive or through an Ethernet connection. The incubator is ideal for standard microbial work or low temperature work such as BOD testing, Drosophila, and extremophile bacteria culture because of the high-efficiency thermoelectric cooling. The unit can also add humidity to the chamber with the included humidity pan. Contact your local laboratory equipment distributor or Boekel Scientific directly for more information about this exciting new piece of equipment.
Device Overview
Applications Information
| Shake 'N Bake Rocking Hybridization Oven / Incubator, 136400The Boekel Scientific Shake 'N Bake™ Hybridization Oven gets your lab rocking. With independent temperature and rocking control, three removable shelves and a small benchtop footprint, this hybridization oven is your team's rock star.
Features
Applications
|
Boekel Scientific Large Analog Incubator, 139400 / 139425, 5.0 Cu Ft (115V/230V)Boekel Scientific 5.0-cubic-foot analog incubators bring pro-level performance to college and high school lab settings. The next generation of scientists learn cell culturing, water quality testing, broth incubation and more with high-quality and easy-to-use analog incubators from Boekel Scientific.
Features
Applications
| Boekel Scientific TTT Small Laboratory Incubator, 135000, 0.34 Cu Ft (115/230V)Boekel Scientific introduces a new forced air convection incubator for temperature sensitive applications. Specifically designed for maximum temperature stability and uniformity the TTT incubator or “Tight Temperature Tolerance” incubator uses mechanical convection and an optimized configuration. Ideal for waste water/water quality testing, microbiological testing, or any small sample temperature sensitive process. The TTT incubator includes a removable shelf, a large viewing window and an easy to use digital control system with a configurable alarm and timer. The TTT is recommended for use with plates, trays and 100ml samples in testing for heterotrophic bacteria including coliform, enterococci, and pseudomonas aeruginosa. The 0.34 cubic foot (9.62l) unit can hold twelve 120mL bottles or eight 250ml bottles or multiple trays and plates. Boekel incubators are used worldwide in research and medical institutes, water quality testing laboratories, food and beverage quality control labs.
Applications
| Boekel Scientific Medium Analog Incubators, 139300 & 139300-2, 2.5 Cu Ft, (115V/230V)Boekel analog incubators are manufactured in the United States from 22 Ga steel, and the exterior is powder coated for scratch and stain resistance. The interior is easy-to-clean aluminum. All analog incubators come with a thermometer and built in thermometer port. The operating temperature range of the chamber is from ambient +10 to 90°C. Each incubator has a circulation fan to improve warming time and temperature stability. All units include a digital laboratory timer and shelves.
Boekel analog incubators use a hydraulic thermostat for control of temperature and a separate on/off switch. The 115 volt analog incubators meet UL and CSA requirements and all 230 volt units are CE marked. Ideal for a wide range of applications including culturing organisms, warming of samples, E. coli tests, diagnostic protocols for water, wastewater, food and beverage testing, clinical, cosmetics, pharmaceutical, and biotech testing. These robust incubators are designed for use in research, industrial, food, and medical laboratories. Features
Applications
| Boekel Scientific Medium Digital Laboratory Incubators CCC, 138325, 2.5 Cu Ft (115V/230V)
Features of the Digital Incubators
Applications of Boekel Digital Incubators
|
Boekel Scientific Medium Analog Benchtop Incubator, 139200, 1.4 Cu Ft (115V/230V)Boekel analog incubators are manufactured in the United States from 22 Ga steel, and the exterior is powder coated for scratch and stain resistance. The interior is easy-to-clean aluminum. All analog incubators come with a thermometer and built in thermometer port. The operating temperature range of the chamber is from ambient +10 to 90°C. Each incubator has a circulation fan to improve warming time and temperature stability. All units include a digital laboratory timer and shelves.
Boekel analog incubators use a hydraulic thermostat for control of temperature and a separate on/off switch. The 115 volt analog incubators meet UL and CSA requirements and all 230 volt units are CE marked. Ideal for a wide range of applications including culturing organisms, warming of samples, E. coli tests, diagnostic protocols for water, wastewater, food and beverage testing, clinical, cosmetics, pharmaceutical, and biotech testing. These robust incubators are designed for use in research, industrial, food, and medical laboratories. Features
Applications
| Boekel Scientific Medium Digital Benchtop Incubator CCC, 138200/138225, 1.4 Cu Ft (115V/230V)Boekel Scientific’s line of CCC Digital Incubators feature either see-through poly-carbonate doors or solid doors for convenience. Available in either 115 or 230 volt options, the incubators are produced from 22 Ga steel and the exterior is powder coated for both scratch and stain resistance. The interior is easy-to-clean aluminum. The new system allows for digital input and readout of incubation temperature. An over-range safety thermostat with a red warning indicator light is standard on all units. The temperature range is now expanded to go from ambient +10 to 90°C. Boekel CCC Incubators contain a blower fan for rapid heat-up and better uniformity of temperature. The units utilize a PID controller and a separate power switch. All units include a pocket size digital laboratory timer.
All 115 volt units meet UL and CSA requirements and all 230 volt units are CE marked. Boekel CCCd Digital Incubators are ideal for incubating and culturing of reagents, medias, and samples in just about every laboratory in every market where samples need warming and a steady temperature. Features
Applications
| Boekel Scientific Contrast Media Warmer, 133001 With Locking Door (0.8cuft., 115V/230V)The Boekel Scientific Contrast Media Warmer with a locking door is a safe option for hospital and lab settings that see a lot of traffic. Digital controls and LCD temperature display make this 0.8-cubic-foot incubator an economical choice.
This contrast warmer comes with three removeable metal shelves and can accommodate up to four, which are available for separate purchase on this page. Features
Applications
| Boekel Scientific Mini Incubator, 260700, 0.1 Cu Ft, Lab Incubator (115V/230V)The Mini Laboratory incubator is great for places with little space or when you need a dedicated incubator for microplates or petri dishes. The unit has set temperature of 37C and this can be adjusted with the dial in the back of the unit. The chamber is accessed through a see-through, flip-up door. A temperature indicating liquid crystal strip is used to monitor the temperature.
Features
|
Boekel Scientific Small Digital Benchtop Incubator CCC, 138000 / 138025, 0.5 Cu Ft (115V/230V)Boekel Scientific’s line of Digital Incubators feature see-thru polycarbonate doors or solid doors. Available in either 115 or 230 volt options, the incubators are manufactured in the United States from 22 Ga steel and the exterior is powder coated for both scratch and stain resistance. The interior is easy-to-clean aluminum. The new system allows for digital setting and control of incubation temperature. An over-range safety thermostat with a red warning indicator light is standard on all units. The temperature range from ambient +10 to 90°C. Boekel Digital Incubators contain a blower fan for rapid heat-up and better uniformity of temperature. The units utilize a PID controller and a separate power switch. All units include a pocket size digital laboratory timer. All 115 volt units meet UL and CSA requirements and all 230 volt units are CE marked. Boekel Digital Incubators are ideal for incubating and culturing of organisms, warming medias, and maintaining sample temperatures. Features
Applications
| Boekel Scientific Economy Small Digital Incubator, 133000, 0.8 Cu Ft (115V/230V)Ideal for laboratories, hospitals, and pharmacies, the economy model features an LCD temperature display. Supplied with 2 shelves. The Boekel Scientific Economy Small gravity convection digital incubator is perfect for incubating cultures, test kits, and many other research and medical procedures that require heating at an affordable price. Includes two shelves and accommodates up to four shelves. The unit has a digital temperature readout with control dial. This incubator is only available with a solid door. Great for lab benchtop's with limited space. Ideal for laboratories, hospitals, and pharmacies. Features
Applications
| Boekel Scientific Small Analog Benchtop Incubator, 132000, 0.8 Cu Ft (115V/230V)This gravity convection incubator is perfect for incubating cultures, test kits, and many other biological procedures that require reliable and economical heating. Includes two shelves and accommodates up to four. See through door with analog control and heating pilot light. Features
Applications
| Boekel Scientific Small Laboratory Oven, 107800, 0.6 Cu FtFeatures
WARNING: DO NOT PLACE COMBUSTIBLE OR FLAMMABLE MATERIALS/SOLVENTS INSIDE OR NEAR THIS OVEN. NOT FOR USE IN WARMING PARAFFIN WAX OR ANY OTHER COMBUSTIBLE OR FLAMMABLE MATERIALS AND OR SOLVENTS. Applications
|
Boekel Scientific Medium Laboratory Oven, 107905, 1.6 Cu FtWARNING: DO NOT PLACE COMBUSTIBLE OR FLAMMABLE MATERIALS/SOLVENTS INSIDE OR NEAR THIS OVEN. NOT FOR USE IN WARMING PARAFFIN WAX OR ANY OTHER COMBUSTIBLE OR FLAMMABLE MATERIALS AND OR SOLVENTS.
Features
Applications
| Boekel Scientific Large Laboratory Oven, 107801, 2.7 Cu FtWARNING: DO NOT PLACE COMBUSTIBLE OR FLAMMABLE MATERIALS/SOLVENTS INSIDE OR NEAR THIS OVEN. NOT FOR USE IN WARMING PARAFFIN WAX OR ANY OTHER COMBUSTIBLE OR FLAMMABLE MATERIALS AND OR SOLVENTS.
Features
Applications
| Touch Screen Blood Collection Mixer, 302000 (100-240 VAC)The Boekel Scientific Blood Collection Mixer, also known as a blood collection scale, or blood scale, has an easily viewable, bright color touch screen that displays the collection data in real time. The most important collection details such as current volume, target volume, percent full, elapsed collection time and estimated time remaining are displayed during operation. The unit also has a large active pictorial that visually represents the blood collection bag, so phlebotomist can observe the progress from a distance while tending to other donors. The blood collection mixer also has a highly accurate scale, removable long-life battery pack, USB and Ethernet data ports. The system has an integrated handle, removable magnetically attached mixing tray, and a lightweight robust design for easy relocation at mobile donor centers. The system alarms include low flow warning, end of cycle and low battery. Have any questions? Click here to contact us.
| Boekel Scientific Orbitron V, 281111, Orbital Shaker With Adjustable Angle (115V/230V)
|
Boekel Scientific Rocker II, 260350, Adjustable Speed Rocker (115V/230V)
Applications
| Boekel Scientific Orbitron I Laboratory Mixer, 260200, Fixed Speed Nutating Mixer(115V/230V)
Applications
| Boekel Scientific Orbitron II Laboratory Mixer, 260250, Adjustable Speed Nutating Mixer(115V/230V)
Applications
| Boekel Scientific Mini Variable Speed Tube Rocker, 280150 (100-240 VAC)
Applications
|
Boekel Scientific Variable Speed Extra Large Tube Rocker, 282000 (100-240 VAC)
Applications
| Boekel Scientific Mini Tube Rocker, 260450, Small Laboratory Blood Tube Rocker (100-240 VAC)
| Boekel Scientific Variable Speed Mini Orbitron, 201100, Small Laboratory Mixer(115V/230V)Small nutating lab mixer that provides gentle continuous mixing of specimens in blood tubes, microcentrifuge tubes, glass vials, or plates. Supplied with a non-slip dimpled mat and a non-slip flat mat. Variable speed from 4-24 rotations per minute.
Features
| Boekel Scientific Mini Tube Rotator, 260750, Microtube And Conical Bottom (100-240 VAC)The Boekel Scientific Mini Tube Rotator is ideal for mixing laboratory tubes. Molecular Biology, Histochemistry and Clinical applications. Supplied with carousel for 36 x 1.5/2.0mL Tubes. Additional tube carousels available. Cold room and Incubator compatible.
Features
|
Boekel Scientific Tube Rotator, 260650, Microtube And Conical Bottom Mixer (100-240 VAC)Boekel Scientific Laboratory Tube Rotator is Ideal for Biochemistry, Molecular Biology and Clinical applications. Provides gentle or vigorous mixing. Supplied with a carousel for 14 x 50mL tubes.
Features
| Boekel Scientific Mini Tube Vortex Mixer, 270100, Laboratory Vortex Mixer(115V/230V)Boekel Scientific Mini Tube Vortex Mixer brings a small footprint and big value to your bench. Mix up your team's routine with a pressure-sensitive cup that allows for either touch-activated or continuous mixing, making this vortex mixer ideal for centrifuge tubes, culture tubes, blood tubes and test tubes.
Rubber suction cup feet absorb vibrations and prevent this lab vortex mixer from walking across the bench.
| Boekel Heat Cool Thermal Mixer II, 270800 & Heat Only 270900 (Heat/Cool And Heat Only Shaker)The Boekel Scientific HC Thermal mixer has a large touch screen, interchangeable blocks, heat/cool and heat only thermal mixers. Perfect for precise sample preparation when working with DNA, RNA, plasmids, cultures, and enzymatic reactions. Supplied with one 270811 block for 24 x 1.5mL tubes.
Boekel Scientific's Heat/Cool and Heat Only Thermal Mixers are ideal for heating, cooling, and shaking samples. Each unit has a large intuitive touch screen, interchangeable auto-recognized blocks to fit most laboratory consumables, multiple modes for increased process performance and a large and accurate temperature and mixing range. These thermal mixers are programmable and capable of thermocycling with up to 5 temperature and mixing speeds steps or they can be operated at single temperature and speed setpoints. Ideal for buffer prep, stability testing, small scale culturing, isolating nucleic acids, preparing proteins, and RNA extraction or DNA extraction. Features
ApplicationsExtraction, expression, labeling, cloning, purification and analysis of proteins, DNA, Plasmids, RNA, from gels, magnetic beads, tissue, or biological samples
| Boekel Scientific Jitterbug 2/4 Incubated Microplate Shaker, 270400 / 270440 (100-240 VAC)The Boekel Scientific Jitterbug 2 and Jitterbug 4 are heated microplate shakers are ideal for immunoassays like ELISA, PCR and other research procedures requiring heating and mixing of microplates. Equipped with a heated lid to provide greater uniformity and prevent condensation. Independently control set temperature, mixing speed and mixing duration.
Features
Applications
|